Jenna Haze Got Dick Tee Shirt Scene

Pendant Fish - Fish pendant

Here is another pendant aluminum, distantly inspired by the world of fish.
The finish has been left unfinished, with only polishing the front of the grooves.

EN: Here Another aluminum pendant, inspired to the sea world.
Finish is raw, with the only exceptions of four polished grooves.

Fondue Without The Pot

Pendant Soly - Soly's pendant

This post is dedicated to the aluminum pendant I made for a friend's birthday.
Strangely I also remembered to take pictures as they do the job.
Being the first time that I created something like that, I wanted to do before a prototype to see how the material reacts to prolonged contact with skin and sweat, as well as whether it gave rise to allergic reactions whatsoever.
Here are the first sketches of the prototype with the outline you.

EN: This post is about the aluminum pendant that I made for the birthday of a friend of mine.
Curiously I remebered to take pics of the job while it progressed.
Being the first time I was trying to make such a thing, I've done a prototype to see how it reacted in contact with sweat and skin, as well to see if it caused irrirations.
Here are shown the first drawings; on the right there's the first prototype, stil not completed.
Vengono eseguiti i fori con il trapano.

EN :The aluminium bar is drilled
Si taglia l'interno dei fori mediante un cacciavite e un piccolo martello.

EN :Then the letters are shaped with an old screwdriver and a hammer
After a long process of writing the file begins to be readable.

EN: After quite a long time of refining the whole thing with a file, you can see the letters Clearly.
the prototype is finished, ready to be worn.
Being only a proof satin finish remained.

EN: Here's the finished prototype, ready to be Carried. Being only a prototype, It Was left with a glazed finish.
pendant is the final, with the "Y" instead of "I", a diminutive being more correct.
As you can see is much more refined and polished, almost mirror (it totally mirror was not recommended because aluminum is easily scratched).
The "S" is enriched by the application of a zircon with a set of interlocking and sealing film.
The edges of the letters this time shall be rounded to the patient work of sandpaper. The only
polishing required two days of work.

EN: Here's the actual pendant, with a "Y" instead of "I", Because The Name Was Written in a diminutive.
As you can see, it's much more Refined - It Is Almost mirror polished (it is not really mirror polished aluminum can scratch Because Easily).
The "S" is adorned with a zircon, set in place with epoxy glue.
The letters are rounded off with sandpaper.
The polishing required two days of work.
Un'altra vista che permette di apprezzare la superficie lucidata.

EN :Another view to see the polishing.
Il ciondolo insieme alla sua scatola in legno.

EN :The pendant with its wooden box.
Il ciondolo e il prototipo insieme.

EN :The actual pendant (right) and the prototype (left).

Veet On Genital Areas

Portabit for Leatherman Wave

Spesso ho con me una pinza multiuso Leatherman Wave, che tante volte si è rivelata utilissima.
Avendola sotto gli occhi tutti i giorni non potevo non pensare a qualche miglioramento.
Questo è un portabit universale che,fissandosi al posto dei bit dedicati, permette di usare anche punte non disponibili nel bitkit Leatherman.E' stato realizzato molando un comunissimo portabit esagonale.

EN :OFten I have on hand a Leatherman Wave multitool, which many times has been useful in doing small repairs and the like.
Because of this, I thougt about an improvement of the bit holder.
This is a standard bit holder, with the stem grinded to the size of the special Leatherman bits (which are a flatter hexagon, while the standard hexagon shape of bits is a regular hexagon); thus I can use regular bits on my Wave.

Quicktime Episode Player

steak knife - steak knife

From convinced carnivore that I am, I could not get a steak knife. This is done with a blade of recovery in 420 steel, grinded to form choice. The handle is made of mahogany.

EN: As carnivorous Convinced as I am, I could not not Have a steak knife.This Was one made with 420 recycled to grind shaped steel blade, with a mahogany handle.

Battery Opperated Heat Blanket

Rosa - Rose

Some years ago I made this wooden rose. A rose because
symbol of love, of wood because it could not wither.
Actually I was too optimistic, but that's another story .. The rose is
Molded from a birch branch. The box in mahogany, oak and bamboo.

EN: Some years ago I made this wooden roses.
A rose as symbol of love, and a wooden one Meaning it will not wither. In
facts I was too optimistic, But This Is Another Story .. The carved roses
Was strarting from a birch branch. The Box Was Made of mahogany, oak and bamboo.

Understanding Scorpio Men When They Disappear

shirasaya

If you've watched the various previous posts that I have noticed a certain fondness for Japan (especially before the Meiji reform). Among the various objects oriental
time I realized this long ago shirasaya. Brusletto
The blade is a high carbon content, riprofilata a wheel and the left sides in brute de forge ". L 'Habaki copper is cold-forged, seamless, in the main body of fir, bamboo and mekugi the lines between grip and slip mahogany.

EN: If You Gave a look at the older posts, you've Probably Noticed my passion for Japan (Especially everything Pertaining to Japan made or done before the Meiji Reform). Various objects
Between the "East-inspired," Some Time Ago I made this shirasaya.
The blade is a high carbon steel one from Brusletto, reprofiled with a grinder and left "Brut de forge" ("as forged" in French). The Habaki is in cold-worked copper, made without soldering Thus, the main handle body in fir, the mekugi is made of bamboo and decorations of the Sheath and handle are made of mahogany.

Male Body Waxing In St Louis

Hearts - Hearts

These two little hearts intertwined, seemingly simple, has been made from a single block of wood.
It's not that I like to complicate life, but did not break it for them together had a symbolic value.

EN: These two little criss-cross hearts, apparently simple, are made from a single piece of wood.
I don 't like to mess up my life, But There Was a symbolic reason in doing this: It Was Like Make Them bounded without brake anything.

Pokemon Heart Gold And Soul Silver Party Shower

Lares II

Fabio Dalla Costa has been kind enough to give me a best photo of the first prototype of the Lares, as well as photographs of the two versions that developed after starting from the same design.

EN: The knifemaker Fabio Dalla Costa has Been So keen to give me a better photo of the first prototype Lares, as well the pictures of the two variants Developed later from the examination design.

How To Masterbe In Bed

Keychain - Keyring

Here is a small key ring with the initial gift to a person who gave me a big pleasure.
It 's a "C " wrapped with a ribbon. She did not come clear as I wanted, but it was still appreciated. The wood is selected African oak.

EN: Here's a small keychain with initials, Which I Gave as a present to someone who did to me a very big courtesy.
It's a "C " enveloper by a tape. It did not get as sharp as I imagined, But It Was Appreciated as well. The wood here is used in selected African oak.

How To Naturally Overcome Nasal Polypse

Lares

now long ago, a group of visitors to the forum cutlery Hill and I, we developed a heavy utility. The project would had to go into production but a series of unfortunate circumstances made things go differently.
Del Lares (this is the temporary name given to the knife) are now the wooden prototype that I developed to 'age and 6 specimens crafted by Fabio Dalla Costa, one in five in N690Co RWL.

EN : Quite A Long Time Ago, Some users of the forum hosted by the Hill cutlery, and me, created a heavy utility knife. Was the design made with the idea of \u200b\u200bindustrial production, a series of events unfortunatly But Did not permit it to be so.
Of this knife, later named Lares, are now left only the wood prototype made at the time I copied and 6 done by Fabio Dalla Costa, a knifemaker, one is made of RWL34, the others are in N690Co.

Wisconsin Dells Bachelor Party Lodges

Gift Pack - Gift wrap

The package has its own importance. Here's a gift bag by
Zatodesign, characterized by wooden gift tag.

EN: Even the packaging has importance.
Here's a present "by Zatodesign", characterized by the box-sealer made of wood.

How Much Do Step Counters Cost

Gentleman's knife

On my last trip to Milan for the annual international fair organized by C orporazione I taliana C oltellinai, I brought a gift to the very kind friend to me hosted this boxcutter tiny pocket.
The blade was made from a Japanese blade in three layers, with exceptional cutting skills. I proceeded to cut it, drill it, and shaped. The grips are
African oak waxed, accurtamente chosen for the attractive colored veins.
A screw nut acts as a pivot, allowing the knife to remove the 'maintenance.
The signature has been applied in a controlled oxidation of the steel.
was not achieved any lock blade aperture, but the appendix rear, in addition to support the opening, means that the thumb of the hand holding prevents accidental closure.

EN : During my last visit in Milan for the meeting of the Italian Corporation of Knifemakers ( CIC ), I gave this small pocketknife to the friend who hosted me in his home.
The blade has been made by a japanese three-layer blade, with extraordinary cutting properties. I shortened it, grinded where I felt it was necessary and I also made a hole.
The scales are made of african oak (wax impregnated), chosen because of its beautiful colours.
A screw with a bolt acts as a pivot, permitting to disassemble the knife for cleaning and to make it harder or softer to open.
The signature has been done by controlled oxidation of the steel blade.
It hasn't got any lock, but as you can see the lever on the back of the blade, when the knife is used, Accidentally Makes harder to close the knife.

Funny Wedding Guestbook Comment

Ring - Ring

A friend of mine, long ago, I commissioned an aluminum ring. The design principle was agreed previously.
finish of the "pot" is brushed while your ring is polished.
The two components are combined with a joint and the ring width is adjustable.

Here the pieces of aluminum cut from sheet metal and just a little roughly.

EN : A friend of mine, Actually a girl, asked me to make an aluminum ring. The Design Has Been Decided previously.
The actual ring is polished, while the ornament is Simply brushed.
The two parts are joined with a flange, the diameter of the ring is adaptable.

show Here are the two aluminum pieces after cutting from the sheet.
Finished pieces before the 'assembly

EN: The pieces before assembly.
The end result

EN: The result