How Much Do Step Counters Cost

Gentleman's knife

On my last trip to Milan for the annual international fair organized by C orporazione I taliana C oltellinai, I brought a gift to the very kind friend to me hosted this boxcutter tiny pocket.
The blade was made from a Japanese blade in three layers, with exceptional cutting skills. I proceeded to cut it, drill it, and shaped. The grips are
African oak waxed, accurtamente chosen for the attractive colored veins.
A screw nut acts as a pivot, allowing the knife to remove the 'maintenance.
The signature has been applied in a controlled oxidation of the steel.
was not achieved any lock blade aperture, but the appendix rear, in addition to support the opening, means that the thumb of the hand holding prevents accidental closure.

EN : During my last visit in Milan for the meeting of the Italian Corporation of Knifemakers ( CIC ), I gave this small pocketknife to the friend who hosted me in his home.
The blade has been made by a japanese three-layer blade, with extraordinary cutting properties. I shortened it, grinded where I felt it was necessary and I also made a hole.
The scales are made of african oak (wax impregnated), chosen because of its beautiful colours.
A screw with a bolt acts as a pivot, permitting to disassemble the knife for cleaning and to make it harder or softer to open.
The signature has been done by controlled oxidation of the steel blade.
It hasn't got any lock, but as you can see the lever on the back of the blade, when the knife is used, Accidentally Makes harder to close the knife.

Funny Wedding Guestbook Comment

Ring - Ring

A friend of mine, long ago, I commissioned an aluminum ring. The design principle was agreed previously.
finish of the "pot" is brushed while your ring is polished.
The two components are combined with a joint and the ring width is adjustable.

Here the pieces of aluminum cut from sheet metal and just a little roughly.

EN : A friend of mine, Actually a girl, asked me to make an aluminum ring. The Design Has Been Decided previously.
The actual ring is polished, while the ornament is Simply brushed.
The two parts are joined with a flange, the diameter of the ring is adaptable.

show Here are the two aluminum pieces after cutting from the sheet.
Finished pieces before the 'assembly

EN: The pieces before assembly.
The end result

EN: The result

Where Can U Get Herpes?

Brooches - Hairslide

A simple pin, hair clips, bamboo, worked in the back with a geometric random

EN: A simple bamboo hairslide, randomly decorated with geometrical patterns.

Is It Legal To Own A Platypus In The Us

Fearless Lagoon


has recently been implemented, in collaboration with the Knife Hill in Busto Arsizio, a special provision to 'HIGH Association (Lagoon Troops and amphibians), Section of Trieste.
The model chosen was the top of the range. It could not be otherwise because it is the most suitable for amphibious operations, thanks to the PVD nitride in vacuum, which makes it virtually impervious to salt corrosion. The knife of
'HIGH is distinguished by the logo of the association riportato vicino alla guardia e, dalla parte opposta, la matricola progressiva.

EN :Recently, in collaboration with the Collini's cutlery in Busto Arsizio (Italy), a limited number of Fearless knives made specifically for the anphibious troops members association(known as ALTA - some kind of "marines" of the italian Army).
The model choosen is the best of its kind. It couldn't have been differently: because of the nitriding of the blade made in vacuum (PVD), the whole knife, made of stainles steel, is highly corrosion resistant, thus it is more than adequate for underwater operations.
The ALTA knife can be recognized from the association logo near the hilt and, on the other side of the blade, the progressive Matriculation.

Blueberry Black Stool

Fearless

This is my first project on an industrial scale by Viper-Tecnocut Maniago (limited by 330pezzi).
This is a combat knife, designed to be made in one piece and then landed mass production thanks to the interest of Maniago Tecnocut. Fearless
presented EXE (Expo) 2006 in Brescia, has been well received by the public and professionals, to the point of earning the cover of Knives, a review in the same magazine, an article about Blades' s author as well as various quotes from publications in the arms sector.

EN: This is my first design made industrially in 330 pieces by Viper-Tecnocut of Maniago. It is a combat knife, designed to be made from a single piece of steel.
Fearless, presented at EXA show of Brescia in 2006, Received a good response from the public and from other cutleries present at the show, the knife Was Also presented on Various knife and weapon magazines. In Particular It Was presented on the first page of the magazine "Knives", with an Extensive article inside.
The final form is the result of a lengthy study of functional and ergonomic, which developed through the creation of several prototypes.

EN : Has Been Reached The final shape after a long study of ERGONOMY and functionality, many wood Also by realization of prototypes.
The production model is offered in three versions. A blade in satin, with a camouflage jacket and a protected by a nitriding particularly refined, making it suitable for use in chemically aggressive environments, such as the marine environment.

EN: The knife is sold in three variants: satin, camouflage and coated with nitrides with a special tecnique, Which Makes The blade Almost rust-proof; Thus it is ideal for use in salt water environments.
The strengths are the precise construction of the Fearless (Unusual for a soldier's knife in this price range), nice balance, ergonomics, low weight combined with extreme ruggedness and materials that previously could only be found on much more expensive models. The
N690Co knife is made of steel, hardened to the hardness of 58 HRC, while the handle is screwed in with two grips micarta (durable plastic and consisting of layers of cotton and synthetic resin).

EN: The precision cutting of blanks (never seen before on Such kind of military knives), the accurate balancing and ERGONOMY, low weight and extreme strength Makes it an excellent product.
The whole blade is made of steel N690Co, hardened at 58 HRC, while the handle is made with two micarta scales (resin impregnated cotton, resistant to-use, water, blood, as well as Various chemicals). The scales are set in place by two bolts screwed into the tang.
The knife is sold with a sheath made from multi-Vega, a leading manufacturer of civil and military accoutrements. E 'equipped with removable pocket, belt loop opening, belt and thigh attacks MO.LLE (Modular Lightweight Load Carrying Equipment) for multiple integration in modern military tactical vest.

EN: The knife is sold with a multipositionable Sheath made by Vega, the leader in the production of tactical vests, Both for the Military and for Civilians. The Sheath has a removable pouch, openable belt loops, leg and web MOLLE webbing.
A number of specimens have been purchased privately by military and security professionals engaged in missions abroad. In civil
Fearless has proven to be a great utility light hiking.

EN : A Number Of These Have Been knives bought by military personnel and security people working abroad. Also, the Fearless has shown to be an excellent light utility knife.

Homemade Stereo Reciever

Daga - Dagger

few years working as a designer for some of Maniago cutlery. Therefore, build often wooden models to allow to assess first hand my projects.
Unfortunately, since there is a cheap way to record my drawings, I can only publish this dagger, made more for fun than thinking about effective mass production (very unlikely for this type of object).

EN : From a Few Years I work as a designer for Some cutleries in Maniago. Thus Often I make wood prototypes to see how the knife will Actually show. Unfortunatly, not found HAVING Another way to register my designs, I can only show this dagger, made for fun - it Would Be Quite Difficult to produce industrially Such a knife, Because of the italian law.

Knitting Pattern For Baby Papose

Bookmark-Bookmark

Also on katana, this is a bookmark I got together with a text on Bushido.
Made of wood, wire and aluminum.

EN : Another katana-inspired work: this is a bookmark Which I Gave as a present, together with a book about Bushido.
It is made of wood, aluminum wire and sewing.

Should My Wart Bleed If I Pick It

Mini katana

Being fond of martial arts, I have a particular fondness for the Japanese katana.
This is a removable miniature (and very sharp) that I gave recently to my training partner.
The blade is made from a hacksaw know iron, cut and sharpened. The Habaki was made of copper, the tsuba tsuka aluminum and wood and wire.

EN : Being an amateur of martial arts, I have some kind of feeling for the Japanese katana.
disassemblable This is a miniature (very sharp, Indeed) Which I made for a friend, Also in martialist.
The Blade Has Been Made out of a steel saw, grinded and sharpened. The Habaki is made of copper, and aluminum in the tsuba tsuka in the wood and sewing thread.

Felon Hunting In Colorado

Drumsticks - Drumsticks

A good friend of mine plays drums but .. was not well with the sticks on the market. I could not try to solve it?
seems to work well, so that those pictures are now I have already consumed him and made another pair.

EN : A dear friend of mine plays drums But .. He Did not find a good pair of drumsticks. So I made for him
These custom sticks.
They Seem to work well, and he asked Already to me for a new pair.

Funnywedding Readings

Collar - Choker

To begin with I put some pictures of work done in the past. Or at least the ones I have had the intelligence to photograph the first to give.
This is a collar made of aluminum, hammered and polished, made at the request of a friend of mine and specifications.

EN: I begin posting photos Some of my older creations. Or at least Those That I photographed before delivering Them. This choker
alluminium, hammered and brushed, Was made under friend's specifications.

Wholsale Prices On Solini Suits

A New Beginning - A new beginning


Welcome to my blog.
Waiting for a real website, I will use this web space to keep you updated on my accomplishments as a designer of knives, and all the little things that I create for myself and my beloved friends.

EN: Welcome to my blog.
Waiting for a real Internet site, I'm using this space to keep you updated about my creations as designer knife, And Also all about little things that i make to please myself and my friends.